Gypser Kit - step-by-step directions and tips
1) Connect the USB cable and fully charge the battery, which will extend the battery lifetime.
2) The battery is fully charged once the red light is off. Press rapidly 5 times on the button rapidly to activate the battery.
3) Install Pancake coil for dry herb or Ceramic Plate coil for wax. Press the button and check if the coil is active.
4) Load the chamber, screw the coil screen, close the mouthpiece and it's ready for use.
Make sure the vape battery is fully charged before first use.
To clean the chamber: simply burn the waste by activating a coil multiple times. Make sure you do this in the open air because of the smell and smoke.
If you use an adjustable power source, don't use power higher than 25 watts at the most because it will burn the vape coil.