Horizon Arctic Sub-Ohm Tank by Horizon Tech is a sub-ohm tank by a company that wants to put the sub-ohm tank game to rest. The Horizon Arctic Tank comes with two Bottom Turbine Dual Coils BTDC: first 0.2Ω that can work with 30W-80W mods and second 0.5Ω that can work with 30W-100W mods, so you have the option to replace whatever you prefer and think is the best. Arctic Tank uses the new conceptions that consist of 4 airflow valves. The Horizon Arctic tank is 100% USA-made Kanthal wire, 100% organic cotton, which is healthier and performs better. Excellent cooling system, even under the high wattage, the drip tip will not be too hot to hurt your tongue. A Bottom Turbine Dual Coils is used in Horizon Arctic pre-installed with a 0.5 Ohm coil head and includes a 0.2 Ohm extra replacement atomizer coil head.
Features:
Remark:
BTC 0.2 ohm work with 20W to 50W
BTC 0.5 ohm work with 20W to 40W
BTC 1.2 ohm work with 10W to 25W
BTDC 0.2 ohm wok with 30W to 100W
BTDC 0.5 ohm work with 30W to 80W
Horizon Arctic Tank Includes:
1x Horizon Arctic tank with 0.5 Ohm BDTC
1x Extra Aspire Atlantis BDTC coil at 0.2 Ohm
1x User Manual
Suggestion
NOTE: This tank is a SUB-OHM tank and will only work on devices that can read SUB OHM coils of 0.5ohm and lower. Standard eGo style battery WILL NOT work with this battery. Please check if your device will work with this tank before purchasing.
Tips:
To fill the Arctic, unscrew the bottom cap, and fill with e-liquid. Only fill down the side of the tank and avoid putting fluid in the middle. Once you reach the top of the center post, reinstall the bottom cap. Set the airflow ring by rotating it to your desired setting, and you are ready for a great vape.
The metal tube in the center of this clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the clearomizer.
When unfastening the base to refill the clearomizer, the seals are temporarily broken, and liquid will leak from the mouthpiece or escape into the center tube. Therefore, always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the clearomizer.
The clearomizer head of the tank can unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the tank.
It is normal to find a small amount of liquid in the battery contact area when removing the clearomizer or any atomizer. We recommend cleaning the battery before charging it.
When possible, keep the tank full and never below 1/3 full of eLiquid. This helps maintain the vacuum in the tank and prevent leaks.
Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one