The Geekvape has once again shown that it can surprise. So we’re pleased to announce the M100 is the most compact and secure device from the Geekvape, an updated version of the Geekvape Aegis Mini. Innovations in engineering have made this device smaller, lighter, more convenient, and at the same time equipped with IP68 protection. Quite frankly, the Geekvape Aegis Mini 2 is pocketable and can be taken with you wherever you go, no matter if it's too cold or too hot outside. Furthermore, this device is not afraid of anything; dust, sand, dirt, and even shocks are not a hindrance for Geekvape M100.
The Geekvape M100 received protection against accidental clicks by implementing the "A-Lock" system. You will not need four or even three operations to secure your device, and just one movement blocks absolutely all functions. A high-quality 1,08” color display integrated into the side of the device makes it more convenient to use. The M100 has an integrated battery, unlike the Geekvape S100.
The Geekvape M100 mod powered by an integrated lithium battery with a 2500mAh capacity and a maximum power of 100W output allows you to enjoy your favorite flavors for about 10 hours per charge. In addition, the Type-C port on the top of the device enables connecting 5V/2000mA output and enables quick charging with an estimated charging time of approximately one hour. Finally, protection against complete discharge and voltage surges will extend the life of the Geekvape Aegis Mini 2 battery for longer.
The Geekvape Zeus Nano 2 tank is compatible with free-base vape juice and supports MTL or DL vaping. Along with that, the Z Nano 2 tank implements a threaded top fill system and holds a maximum e-juice capacity of 3.5ml with a bulb glass or 2.0ml with a tube glass. Furthermore, the removable top closes the e-liquid openings and secures against leakage. In addition, the removable 510 drip tip prevents overheating because of the Delrin engineering thermoplastic. Finally, the high-grade reinforcement transparent glass is reinforced and prevents cracks.
The Geekvape Zeus Nano 2 is compatible with the Geekvape B coils series. In addition, the Aegis Mini 2 kit includes two types of coils for DL and MTL vaping methods; DL 0.2Ω 80 watts and MTL 0.6Ω 25 watts coils.
The Zeus Nano 2 tank features a top airflow system with two massive air intake openings regulated by an AFC ring. Enormous airflow through massive inlets gives the ability to have complete control over how hard the air gets into it, and controlled airflow will reveal the authentic taste of your favorite juice.
Product Type: Vape Mod
Connection: 510 Thread
Internal Battery: Rechargeable 2500mAh [Lithium]
Wattage Range: 1-100W
Voltage Range: Max 12V
Resistance Range: VW Mode: 0.1-3.0Ω
Temperature Range: 200°F-600°F
Output Mode: VW/VPC/TC/TCR/BYPASS
Display: 1.08” TFT Screen
Intelligent AS Chipset: 0.001S Firing Speed
Intuitive Firing Button / Two Adjustment Buttons
Firing Safety: “A-Lock” System
Material: Zink-Alloy Construction
IP68 Rated: Dust-Resistant, Water-Resistant, Shockproof.
8S Overtime Protection
Over-Discharge Protection [Low Battery Warning]
Overcharge Protection [Authomatically Shuts-Off Charging]
Charging Method: AC/USB [5V/1500mA]
Charging: Type-C Port
Colors: Classic Black, Silver, Gray, Navy Blue, Red, and Rainbow
Tank Connection: 510 Thread [Floating Pin]
Tank Capacity: 2.0ML
Filling: Top Fill - Dual Ports
Airflow: Top-To-Bottom Airflow System [AFC Ring]
Drip Tip: 510 Delrin Resin
Replaceable Coils: Yes
Coil Installation: Screw-In
Coils Compatibility: Geekvape B Series
B 0.2Ω Ni80 Meshed Coil 50-80W
B 0.6Ω KA1 Meshed Coil 15-25W
Coil Rebuildable: No
Construction: 304 Stainless Steel
High-Temperature Resistant [Explosion Proof]
High-Grade Glass Reinforcement
Unique Anti-Leakage Design
Base Diameter: 22mm
1x Geekvape M100
1х Zeus Nano 2 Tank
1x 0.2Ω B Mesh Coil
1x 0.6Ω B Mesh Coil
1x Type C Charging Cable
Spare Parts & Coil Tool
To regulate the screen brightness, you should press once firing and up or down buttons.
A triple tap of the power button allows you to check all additional information using the up and down buttons. Toggle left or right to turn off or turn on the A-Lock
To prolong the lifespan and prevent leakage, prime the coils before first-time use. Then, when applying the coil for the first time, drip vape juice everywhere you see the cotton on and inside the coil. Then, place the coil in the pod, refill e-juice in full, wait five minutes, and use as usual.