The Octave Terp Timer is a desktop unit that senses the temperature of the bubbler. The Octave Terp Timer runs on an integrated 1000mAh battery and enables the possibility of increasing the vape experience by determining the exact heating temperature. Moreover, the Octave provides the terp timer with a 10-years warranty.
The Terp Timer Octave features a 3.5` tall, which is perfect to pair with the small dab rigs. The Terp Timer Octave case is crafted from aluminum and features a hexagon shape. Such an original solution allows using the device in a horizontal position. Moreover, by changing the sides, the laser position will be at different levels from the surface to adjust the height of the sensor, which allows you to work even with the smallest dab rigs. The functional part of the Terp Timer Octave is located on the top. The device employs a monochrome screen, three buttons [set button, up and down buttons], a sensor, and a laser. In addition, the bottom side employs a magnet, which magnetizes any metal surface. The back side of the device holds the micro USB port.
The Terp Timer runs on an integrated 1000mAh battery, rechargeable by the micro USB port. The functional part of the device is located on the top. The device employs a monochrome screen, three buttons [set button, up and down buttons], a sensor, and a laser. Furthermore, the bottom side employs a magnet, which magnetizes any metal surface.
The sensor is accurate to work accurately between one and six inches In addition, this unit is calibrated to be accurate between 400 and 700 degrees. This unit is not meant to scan the skin but only to scan the banger.
The sound mode of the device employs two options:
5 beeps when the banger features low temperature
10 beeps when the banger matches the correct temperature
Besides, when the sound mode is switched off, the screen changes the color to green, mentioning the banger matches the correct temperature.
The device runs on a 1000mAh battery and charges through the micro USB port. Due to the recharge process, the power button will light red. The Led indicator lights blue when the battery is recharged. The integrated battery lasts for two to three months per charge. Moreover, the device features a battery-saving mode, which will automatically shut down in 20 minutes if there is no button interaction.
Model: Terp Timer
Product Type: Vape Pod Kit
Battery Type: Internal
Battery Capacity: 1000mAh
Construction: Aluminium and Plastic
Charging AC/USB: 5V/1A
Charging: micro USB
1x Terp Timer
1х USB Cord
Octave Terp Timer Manual
Please follow the Octave Terp Timer manual for all button combinations:
To turn the device on/off, hold down the front button for three seconds;
Press the set button once, then adjust the volume with up and down buttons;
Press set again and turn on the laser sight with un and down buttons;
To toggle between Celsius and Fahrenheit, press both up and down buttons together ;
Press set once more to set the desired temperature with up and down buttons;
To lock in the desired temperature, press set one final time;
Torch the banger;
Place the Terp Timer under the banger using the laser to alight it properly;
When the banger reaches the optimal temperature, the timer will beep;
When the alarm sounds, you are ready to go;
Don't be alarmed if the sensor shows the temperature in a place that is not correct;
The sensor interacts only with the temperature of the dab rigs;
Also, the Octave Terp Timer manual suggests avoiding the direct contact of the laser with the yes.
[The fact is that laser radiation can seriously damage the eye mesh. In the saddest case, it can cause a retinal burn - an irreparable condition that leads to vision loss]