The SMOK RPM 25W kit is a compact pod mod from the SMOK designers. The SMOK RPM 25W kit features a powerful battery operating a proprietary chip. Besides, the SMOK RPM 25W kit uses the output power range and a tightening adjustment mechanism, a cartridge that supports coils from the SMOK LP1 line, a minimalist interface, and a USB-C port. In addition, the SMOK RPM 25W kit is a perfect kit on the go for all vape lovers.
The SMOK RPM 25W pod kit has good ergonomics implemented due to one semicircular side, which is covered with eco-leather. The SMOK RPM 25W pod kit case crafted of metal weights 56 grams that measure 110mm by 23.2mm by 20.55mm is available in four color variations. Moreover, the SMOK RPM 25W pod kit case features an air intake with a rotating regulator, an OLED display, and a small switch button on the narrow face side. Also, the charging port is installed on the bottom.
The SMOK RPM 25W pod mod runs an integrated rechargeable 900mAh battery and charges using a USB Type-C connector with a current of 0.87A. The RPM 25W pod mod regulates the output power from 5 to 80 watts with a single button in a circle. The device turns on/off using the same button, and activation only occurs when tightening. Furthermore, the SMOK RPM 25W pod mod kit employs a monochrome display that exposes information about the operation of the device.
The SMOK RPM 25W pod system kit is powered by an integrated 900mAh battery and employs the resistance of a high coil. Such battery power is enough for two to three days of battery life. The battery charges via a Type-C port on the base of the case. Besides that, the SMOK RPM 25W pod system suit the safety features such as low/high, short circuit, and over-charge/ discharge protection.
The RPM 25W fits newly developed refillable cartridges. The cartridge holds a 2.0ml e-juice capacity, refills from the side wall, and is held in the battery box by the magnets. Moreover, the cartridges fit the already familiar SMOK LP1 series coils.
The kit employs two SMOK LP1 coils. The LP1 0.9Ω mesh-designed coils provide tight DL draw with small vapors. More than that, the device supports three more kinds of coils from the LP1 series:
Meshed 0.8Ω coil
DC 0.8Ω MTL coil
Meshed 1.2Ω coil
The SMOK vape mod RPM 25W employs an adjustable airflow. A small 360-degree rotating wheel realizes the required tightening level on the front of the SMOK vape mod RPM 25W. In addition, the SMOK vape mod RPM 25W fits the vaping style of MTL and DL and has a moderate amount of steam and excellent taste.
Lightweight
Draw Activation
Simple to Utilize
Ergonomic Design
Capacious Battery
Quick Charge
Coil Variety
No Leakage
Airflow Changer
Brand: SMOK
Model: RPM 25W
Product: Pod Mod
Pod Capacity: 2.0ML
Pods Refillable: Yes
Pod Installation: Push-Fit
Filling: Side-Fill
Battery Type: Integrated Rechargeable
Power: 900mAh
Resistance Range: 0.6Ω-2.5Ω
Variable Wattage: 5-25W
Replaceable Coils: Yes
Coils Installation Method: Push-Fit
Coils Compatibility: LP1 Line
0.9Ω Mesh Coil
Adjustable Airflow Mechanism
Construction Material: Aluminum/Plastic/Leather
Display: 0.69 Inch on Front Flan
One Control Button
Leakproof Protection
Input Voltage: 3.3V-4.2V
Charging Voltage: 5V
Charging Method: USB-C Adapter
Charging: Type-C
Height: 110mm
Width: 23.3mm
Depth: 20.5mm
Weight: 56g
1x RPM 25W Mod
1x RPM 25W Cartridge [LP1 Meshed MTL 0.9Ω Coil Preinstalled]
1x LP1 Meshed MTL 0.9Ω Coil
Type-C Cable
User Guide