The Folartech Bubbler Electric DAB rig runs on an integrated 1800mAh battery. The Folartech Bubbler Electric DAB rig is one of the smallest devices designed for wax fillers. Furthermore, the Folartech Bubbler Electric DAB rig employs three temperature modes and the quartz glass cup. This device perfectly matches to be used on the go due to the tiny size and simple operating system.
The Folartech Bubbler is a portable DAB rig device with a compact size [97mm by 33mm by 27mm]. The top side of the portable DAB rig holds all the electrical components. The front of the top side has a USB port and a single button, paired with a LED indicator. On the top, there is a wax compartment and an inhaling tube. The bottom side is a water flask that connects tightly with the top side by the o rings. In addition, the bottom side of the portable DAB rig features a flat bottom to be used on the flat horizontal surface.
The Folartech Bubbler vaporizer features a simple in-use functionality. The Folartech Bubbler vaporizer employs no display and a single button. The integrated battery charges by the micro USB port in two hours. Moreover, the Folartech Bubbler vaporizer uses three temperature options.
The Folartech electric DAB rig employs three temperature modes:
500C/930F- Green
550C/1020F- Blue
600C/1100F- Purple
Furthermore, the wax vaporizer has additional bottom lighting, which illuminates the flask creating a pleasant atmosphere.
The Folartech Bubbler, unlike other wax vaporizers, features a pre-heat mode. Activation of the preheat mode starts the 35sec vaping session [5sec pre-heat time and 30sec warm time]. The bottom LED light indicates when the device is ready to go.
Brand: Folartech
Product Type: Electric DAB Rig
Power: Integrated 1800mAh Battery
Working Voltage: 3.4V, 3.6V, 3.8V
Temperature: 500C/930F, 550C/1020F, 600C/1100F
Coil Type: Quartz Glass Cup for Great Vapor Production
Beginner Friendly, Single Button Operation
Ready-to-Use After 35-Second Preheat
Charging AC/USB: 5V/1A
Charging Port: Micro USB
Hеight: 97mm
Width: 33mm
Depth: 27mm
1x Folartech Bubbler
1x USB Cable
User Manual
The following steps explain how to use a dab rig electric Folartech Bubbler.
Fill the bubbler.
Fill the wax in.
To turn on the device, press the button five times a row. The same combination will turn off the device. [the LED indicator will flash white when the device is turned on and red when in shut down]
To change the temperature mode, press the button three times.
Hold the button for three seconds to turn on the vape session mode.
There are no rules for cleaning a dab rig, so we suggest following the steps below.
Take off all the removable parts of the device.
Wipe the top electric part with a dry napkin.
Place all remaining parts in an alcohol solution.
For greater convenience, use cleaner devices like the Vivismoke Ultrasonic Cleaner Mini.